How to properly wear nitrile gloves to prevent cross infection?
Release time:
2023-07-27 08:39
Proper wearing of nitrile gloves can prevent cross-infection. Here are the steps to properly wear nitrile gloves:
Clean your hands: Make sure your hands are sufficiently clean and washed before putting on gloves. Use warm water and soap for hand hygiene, rinse and dry hands.
Choose the right size gloves: Choose nitrile gloves that fit your palm size. Gloves that are too large or too small are not conducive to wearing and using. Gloves of appropriate size can provide good fit and protection.
Put your fingers into the glove: Gently put the fingertips of one hand into the cuff of the glove, and gradually put all your fingers into the glove. Make sure your fingers go into the glove and avoid creases or voids inside the rabbit glove.
To adjust the position of the glove: Hold the bottom of the glove with the other hand and gently pull the glove up so that it covers the wrist. Make sure the bottom of the glove sits above the wrist for good protection.
Check the quality of gloves: After wearing the gloves, carefully inspect the surface of the gloves for damage, holes or cracks. If the gloves are found to be damaged or have quality problems, they should be replaced with new ones immediately.
Avoid touching unclean items: After wearing gloves, avoid touching unclean items or surfaces to prevent cross-infection. At the same time, avoid touching your face, mouth, nose and other parts with gloves.
Correct removal of gloves: It is also important to remove gloves using the correct method. Pull the glove on one hand down from the wrist to the fingers, keeping the glove inside out. Then, grasp the glove by the bottom with your ungloved fingers and remove it along with the removed glove, avoiding touching the outer surface of the glove.
Throw away used gloves: After the gloves are properly removed, the nitrile glove manufacturer disposes of the used gloves in an appropriate garbage bag or container. Avoid re-touching yourself or others with used gloves.
Related news
Types and maintenance of gloves
There are many kinds of protection for industrial gloves. In addition to chemical resistance, they also have the functions of cutting resistance, electrical insulation, waterproof, cold protection, heat radiation protection, fire resistance and flame retardant. General acid and alkali resistance gloves are not equivalent to chemical resistance gloves. , Since many chemicals have different penetration capabilities relative to the glove material, protective gloves with anti-penetration of various chemicals should be selected when necessary. Protective gloves are upper limb protective equipment that defend against physical, chemical and biological external factors from the fingers to the wrist of the operator. Labor protection gloves During operation, hands are the most vulnerable parts of the body. High-temperature gloves protect hands from radiant heat and flame burns, and are made of materials such as aluminized fabrics, leather, fiberglass, and flame-retardant fabrics.
The functions of protective gloves are: 1. Prevent fire, high temperature and low temperature damage. 2. Prevent damage from electromagnetic and ionizing radiation. Prevent electrical and chemical substances from harming. 3. Prevent impact, cutting, abrasion, microbial invasion and infection. 4. Protective gloves include cut-resistant gloves, labor protection leather gloves, acid and alkali resistant gloves, etc., which are widely used in industrial and agricultural production in our country.
Standard requirements for protective gloves
Protective gloves are widely used in my country's industrial and agricultural production, but the standards used in the production of protective gloves are mostly enterprise standards and industry standards, and there are relatively few national standards. The rapid development of economic construction has accelerated the rapid development of my country's protective gloves industry.
What are the precautions for purchasing protective gloves?
What are the precautions for purchasing protective gloves: 1. Choose suitable size protective gloves. The size of the gloves should be suitable. Gloves that are too tight will restrict blood flow, cause fatigue, and be uncomfortable; gloves that are too loose will be inflexible and easy to fall off.
Add
No. 123, Youyi West Road, Jugang Street, Rudong County, Nantong City, Jiangsu Province
Copyright © 2023 Nantong Nayuan Safety Protection Products Co., Ltd. | Business license | Powered by www.300.cn
Learn more about Nayuan labor protection
We welcome you with an open attitude and extend a win-win hand to you. We are willing to closely connect with our customers with sincerity...